Im Bau: Kenworth heavy + tank trailer

Wohnort: Žalec-Slowenien

Montag, 6. August 2007, 12:10

Kenworth heavy + tank trailer

And it's time for a next model.

Tihs time it is a Kenworth from Revell, heavy hauler. Pretty rare and expensive model, old at least ten years.

The truck will cut and extended, one more steer axle will be added, a crane kit from KFS will be added, with a seat and everything. An extra axle came from Zipi ( :prost:

), and front wheels will be reaplaced with KFS TQ20B wheels.

Next thing is a 3axle dolly, which is going to be made from a 6-axle heavy tank trailer from Revell.

And then comes a trailer. 6-axle flat bed trailer from Revell. It will be cut, turned to extendable, and expected to be 82 cm long when extended.

And on the trailer comes a load. It will be a train car.

The all together length will be huge, also a lot of work will be involved, and a lot of money has allready been spent on this porject. :bang:

Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24

Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von »VW freak« (13. August 2007, 19:07)

Zum Seitenanfang

Modellfreak

Beiträge: 1 946

Wohnort: Bünde

2

Montag, 6. August 2007, 16:39

Hello Matjaz,

I think you want to build a beutiful truck, Revells Kenwoth heavy is ja nice Truck with Bullbar, a lot of weels and so on. This Trailer ist perfekt for the Truck, you can't find anythink thats better for a Heavy Truck.

:wink:

Marco

Zum Seitenanfang

Truckin´Tom

Beiträge: 160

Wohnort: Nöstlbach-St.Marien/ Austria

3

Montag, 6. August 2007, 18:47

Hi Matjaz!

thats a really great project :ok:

- i can´t wait to see the finished Modell!
The Kenworth is a very interesting Truck- i sterted to built it too- but mine is the newest generation by revell.

Where did you get the truck and the trailer- ebay? :nixweis:

Greets, Thomas :wink:

Grüße, Thomas :wink:

Und nicht vergessen: US-Trucks forever!

Zum Seitenanfang

VW freak

Beiträge: 110

Wohnort: Žalec-Slowenien

4

Montag, 6. August 2007, 20:15

Thank you for your wishes.

Yes, all modells used in this composition ( Keny, both trailers and a railroad car ) were bought on e-bay.de.

:wink:

Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24

Zum Seitenanfang

Truckin´Tom

Beiträge: 160

Wohnort: Nöstlbach-St.Marien/ Austria

5

Dienstag, 7. August 2007, 19:02

@ Matjaz:

Thanks for the answer!!!

Greets, Thomas :wink:

Grüße, Thomas :wink:

Und nicht vergessen: US-Trucks forever!

Zum Seitenanfang

Der Käsekopf

Beiträge: 415

Wohnort: Niederlande

6

Dienstag, 7. August 2007, 19:45

Hello Matjaz,

Good luck whit this big project. I will follow your buildingproces. When do you think it will be finished?

Greatz,

Egbert

Zum Seitenanfang

VW freak

Beiträge: 110

Wohnort: Žalec-Slowenien

7

Dienstag, 7. August 2007, 21:50

If all goes well, in about 1,5 or 2 years :rot:

.
I'll take the time and work slowly, because I want to make as good as I can.

:wink:

Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24

Zum Seitenanfang

RODMAN

Beiträge: 2 148

Realname: Andreas

Wohnort: Am Fuß der Eifel

8

Mittwoch, 8. August 2007, 17:19

Hy Matjaz,

looks to become a very interesting and really HUGE projekt.

So, what can I say except:

"Have a nice trip, boy!!"

I will take a look at your posting every time I`ll come to this site.

Wish you lot`s (and ton`s

) of fun and naturally good luck!

Greetz, A.

Immer mit der Ruhe. Das Gras wächst nicht schneller wenn man dran zieht!

In der Mache: MAN F 2000 V10 (Langzeit- )Projekt und meine,

, "Affäre"

Manches noch auf Eis .... :rrr:

....aber langsam wird´s wärmer

Zum Seitenanfang

VW freak

Beiträge: 110

Wohnort: Žalec-Slowenien

9

Freitag, 10. August 2007, 19:59

Thank you.

And on we go. The undercareage is finally put together. At least the length. :cracy:

It's made from 5 pieces. Blue part, two times black part, another and white part. The legth is allready 42 cm.

Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24

Zum Seitenanfang

VW freak

Beiträge: 110

Wohnort: Žalec-Slowenien

10

Sonntag, 12. August 2007, 10:04

And again some progress. The undercareage is finished. It is now straight, in line and glued together.

Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24

Zum Seitenanfang

VW freak

Beiträge: 110

Wohnort: Žalec-Slowenien

11

Montag, 13. August 2007, 19:12

And I have to notice you, that there has been some changes. :rot:

I found some really good pictures, and then also Zipi hepled me to decide to make a different model.
And, there will be no flat bed trailer and no dolly :will:

And also no train car :idee:

There will be just a 6 axle heavy tank trailer from Revell.
The only thing that stays the same, is the truck, and it will be much more modified than originally thought. :verrückt:

And some pictures of the truck that inspired me for this idea.

Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24

Zum Seitenanfang

raceroland

unregistriert

12

Samstag, 18. August 2007, 23:42

Hello Matjaz

What in heavens name is this??????????? it´s a real bombastic roadtrain,also the choice of color is beautyfull not the white / black or red ones we see all the time. :ok:

PERFECT RESULT :hand:

Roland

Zum Seitenanfang

VW freak

Beiträge: 110

Wohnort: Žalec-Slowenien

13

Sonntag, 19. August 2007, 08:16

Thank you.

But I have to admit, that this truck isn't my work. :rot:

I found those pictures on the internet. There are also some others very beutifull and amazing ideas about trucks. :cracy:

3D art pool

And finally the undercareage is ready for painting. Pictures will be followed soon.

And now I'll start working on the trailer.

:wink:

Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24

Zum Seitenanfang

VW freak

Beiträge: 110

Wohnort: Žalec-Slowenien

14

Samstag, 1. September 2007, 20:58

Hi.
I'm asking you all to help me, please.
Could you please give me some ideas about the colour of the main frame ( undercareage ) and for the motor. The truck will be painted like on pictures above in purple with chrome.

Thank you for your ideas.

:wink:

Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24

Zum Seitenanfang

Silencer

Beiträge: 995

Realname: Pascal

Wohnort: Assen Niederlände

15

Montag, 3. September 2007, 05:35

Hallo Matjaz,

Could you send me a detailed picture of the manual where the bullbar is mounted on the truck??

I saw a picture on the box but that picture isn't quite detailed.

With kind regards,

Pascal

Zum Seitenanfang

Silencer

Beiträge: 995

Realname: Pascal

Wohnort: Assen Niederlände

16

Montag, 3. September 2007, 05:43

Hallo Matjaz,

Perhaps you should paint the undercareage in silver or so.
I think its a good combination with the purple paint.

And:

if you don't use the flatbet trailer, is it for sale?? if not, can the load(big engine) be bought??

MFg Pascal

Zum Seitenanfang

VW freak

Beiträge: 110

Wohnort: Žalec-Slowenien

17

Donnerstag, 6. September 2007, 14:47

@ Silencer: The picture is coming. Sorry, but neither flat bed or the cargo are not for sale. They will be used in nekt project. :rot:

Thank you for your advices. The finall color of the frame will be decided today. It will be green, I just don't know yet how light and how intense green.

The main frame is mostly done and customized ( main frame, axles, universal joints,... )

Then I had to do a new cabin holder on the back side.

PE meshes for exhaust pipes are ready.

And first tests of rolling them have began. But I came to an obsticle. I don't know how to roll them without snaping them along the holes. If I do it by the instructions that the PE parts came with, I can roll them, but I don't know how to make them stay rolled. Finall diameter should have been around 12mm, but when I let them go, They unroll back to about 20mm of diamater :motz:

Now I rolled them on a 11,5mm tube, and permanently fixed in that position, so they cannot unroll. I'll let in this way for about 2-3 weeks and hope, that they wiil stay rolled, when I peel off the tape.

If someone has done this before, PLEASE HELP!!! :nixweis:

Silencer:
Sorry, but in instructions it also doesn't say where excatly is the mesh :motz:

Picture of the manual

:wink:

Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »VW freak« (6. September 2007, 14:50)

Zum Seitenanfang

Silencer

Beiträge: 995

Realname: Pascal

Wohnort: Assen Niederlände

18

Donnerstag, 6. September 2007, 15:33

Hi Matjaz,
Thanx for the picture. It is in fact quite helpful.

With the exhaust pipes i can't help you, I have no experience in that.

Good luck with the project,
Pascal

Zum Seitenanfang

alfisti

Beiträge: 4 153

Realname: Daniel

Wohnort: Traun, Österreich

19

Freitag, 7. September 2007, 08:07

Hi Matjaz.

You are building a very nice truck :ok:

, I can`t wait to see it ready!

I don`t think that the exhaust meshes will stay at 12mm after 3 weeks, becaus it is metal and they will always turn back a little.
Maybe you should roll the meshes on a diameter smaller than 12mm, so if they unroll their diameter will be approximately 12, then you can fix it with the pe rings.

I hope it works.

Greetings from Austria :wink:

ALFA ROMEO - Geschmack macht einsam!

Zum Seitenanfang

VW freak

Beiträge: 110

Wohnort: Žalec-Slowenien

20

Freitag, 7. September 2007, 09:57

Thank you, but the problem is, that I've allready tryed to roll them to a 10 mm, but one mesh started cracking between the holes :motz:

.

So now I'v decieded to let them rolled as they are, on a 11,5mm, then I'm gonna super glue them together.

Hope it works. I can't bend no more. If I bend them some more, I'm affraid I'll have to buy a new set.

:wink:

Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24

Zum Seitenanfang

VW freak

Beiträge: 110

Wohnort: Žalec-Slowenien

21

Freitag, 7. September 2007, 21:54

Yesterday I got another ( this one has allready been built, but when comparing the prize I payed against a 120€ for a new one, so I'll just make 1 out of 2 allready built ) Heavy tank trailer.Thank you Skandinavc FH :ok:

.

And now let the games begin :lol:

. The truck is on a pauze ( I still managed to make a new cab holder, new exhaust pipe holders, built the engine to the point, when it is ready for the painting... ) because of lack of will :rot:

. But another trailer returned the will so tomorrow I'll "unpaint" them and make them ready for a new paint, and with a bit of luck, perhaps also cut them both if enough time remains.

Pictures will follow.

:wink:

Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24

Zum Seitenanfang

VW freak

Beiträge: 110

Wohnort: Žalec-Slowenien

22

Samstag, 22. September 2007, 12:38

And again some more progress.

Both trailers that are going to be used in this project.

First I cut out the holders on both sides.

And after a lot of messaureing, thinking, drawing,.... sawing of the undercareafe and of the tubes began.

Some testing pictures of the truck and trailer.

But, the length wasn't good ( the trailer was simply unreal long ), so I started cutting again and last night me and ZiPi came to a super idea. And on with the cutting we go :lol:

. Here is now the body of the truck. It has to be shortened one more time, because it is still too long.

And the body for the trailer.

And a new placement for the trailer. It will now have only 6 axles, bu it will be lengthened.

That's all for now. Oh. The truck will have 2 axles with super single wheels that will be followed by 3+2+6 axles with 4 wheels/axle. :verrückt:

Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24

Zum Seitenanfang

VW freak

Beiträge: 110

Wohnort: Žalec-Slowenien

23

Dienstag, 25. September 2007, 18:21

The body for the truck is glued, edges have been paper-sanded off.

And today I had to cut off from 0 to 1,5mm of the underbody, to level it to total flat, because originaly it was made for a seadle and some other stuff.

And first tests with new profiles for the body, and the underbody is now ready for painting.

Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24

Zum Seitenanfang

VW freak

Beiträge: 110

Wohnort: Žalec-Slowenien

24

Donnerstag, 22. November 2007, 16:21

Uf....
It's been some time, since any progress

.
Well, now I began making some progress on this truck, because it has to be finished before the birth of my son.

I first tryed to coat them in polystyrol plates, the I've put too much glue, and the result was all sprincled :pfeif:

. You can see it on next piscture, so I had to throw them away.

Than I bought a drainage pipe, cut it in 2 pieces.

Then I andpapered it with 400, then 800, and with 1200, and the result is allready something I like. Why sanding if it will be sprayed? For more shiny colors.

Any comments?
:wink:

Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24

Zum Seitenanfang

Butterfly

Beiträge: 192

Wohnort: Reichenbach O.L/Dresden

25

Donnerstag, 22. November 2007, 19:57

wow, what a great project .... i´m very impressed, i cant believe it :respekt:

MfG

Kersten

Im Bau: Jeep Golden Eagle 1:16

Zum Seitenanfang

Silencer

Beiträge: 995

Realname: Pascal

Wohnort: Assen Niederlände

26

Donnerstag, 29. November 2007, 03:38

Hello Matjaz,

Your truck looks very great, keep up the good work.

Ist there any progress??

MFG Pascal

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »Silencer« (29. November 2007, 03:38)

Zum Seitenanfang

VW freak

Beiträge: 110

Wohnort: Žalec-Slowenien

27

Donnerstag, 29. November 2007, 10:10

I hope I will be able to continue soon, because a week ago, I was makeing some progress, but then, when I was cutting off some plastic, one piece of it flew into my eye and got stuck there, so I had to ask my wife in the middle of the night, to take me to the hospital. I'm still recovering, but soon, I hope it will go on.

:wink:

Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24

Zum Seitenanfang

Silencer

Beiträge: 995

Realname: Pascal

Wohnort: Assen Niederlände

28

Donnerstag, 29. November 2007, 12:24

Hello Matjaz,

That's not verry good, who says modell building is a safe hobby...

But i wish you a fast and good recovery from your injuries :trost:

.

With kind regards,

Pascal

Zum Seitenanfang

VW freak

Beiträge: 110

Wohnort: Žalec-Slowenien

29

Donnerstag, 29. November 2007, 20:23

And on we go. My eye is now OK, so I returned to work.

I inserted plastic caps from heavy tank trailers ( the only think that could have been saved ). Then I added some car cit, and left to dry.The car kit "grabbed" both sides, plastic and metal, amazingly strong..

And today I've used some sand paper ( 40, 80, 180, 800 and 1000 ) and the result was super. I also find out, that maybe I won't have to color the pipes, if I sand them very well :idee:

.

Any comments?

:wink:

Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24

Zum Seitenanfang

VW freak

Beiträge: 110

Wohnort: Žalec-Slowenien

30

Dienstag, 22. Januar 2008, 21:20

After a long time, some more progress can be seen, now that the exams are over, and a new desire for model building is here :lol:

.
The trailer undercareage has been put together in one piece. All axles were broken off, so I had to bore holes and make the trailer ready for instalation of metal axels.
And some wireing has been done.

Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24

Zum Seitenanfang

Das Wettringer Modellbauforum

Kenworth heavy + tank trailer