Sie sind nicht angemeldet.

Lieber Besucher, herzlich willkommen bei: Das Wettringer Modellbauforum. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.


Mittwoch, 4. Oktober 2006, 15:45

SCANIA R142 H 4x 2

I'm new here and unfortunatly my deutsch isn't good enough for writing so it is better that i stick with english
so, this is my last project, it will be mix from italeri cab and first part of chasiss and rear part from heller.
as i saw, ther is also a lot of wrong part in the box, so obviusly there will be lot of home work to do it right.

here you can see some parts, suspension are modified, i cut 1mm away from first axle to reduce chassis height,but on rear suspensions i cut only outside,to have 9 foils instead 11, because on rear chassis was already on right position

on rear axle heller put chrome drums, who now why, so first thing was visiting mr muscolo

next i need to schratchbuild fifth wheel suports

and this is chassis glued together, front suspensions is already in its position, on rear part won't be so easy, because suports are wrong :!!

Dieser Beitrag wurde bereits 5 mal editiert, zuletzt von »sviz2000« (13. Oktober 2006, 11:04)


Samstag, 7. Oktober 2006, 13:35

hi, me again

chassis is build together, rear suspension has new suports, fifth whell suport is ready and glued on chassis

test fit for cab, rear suport is higher for aprox. 2 mm because originaly cab sits much too low on rear part.
but, now cab still sits too high on front and still too low on rear, and alltogether is too high, look at fenders,...

and also you can see how wrong is gearstick position

so i have decide to reduce front suports on cab for 1mm and other 1mm on chassis suport

left one is still original, right one is already modified

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »sviz2000« (7. Oktober 2006, 22:02)


Samstag, 7. Oktober 2006, 17:21


could be very interesting, but unfortunatly a lot of pictures are missing, there is only the sign of pictiger...
im Bau: ???

Beiträge: 21

Wohnort: D-63322 Rödermark (OF/FFM)

  • Nachricht senden


Samstag, 7. Oktober 2006, 18:31

Geht doch!


Unter findet Ihr seine Alben, und auch das von Scania! Einbinden geht wohl nicht so glatt!

Tiggr (aka Marcus)


Samstag, 7. Oktober 2006, 21:33

i don't know why pictures from pictiger lasts only for some minutes. :nixweis:
i will upload all this pictures on moj-album and also refresh that message

ok, done, now some new pictures

repositioned lower steps and cuts for fog lights in bumper, i have also cut off main lights suports, whic will bw reposizined latter on the cab

i realy cant live with original fuel tank, so i have schratchbuild my own

and suports are also new

rear cab suport was modified( here is not finished yet) and susies suport was added

and handrail was also schratchbuild

hope that this pictures will stays here

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »sviz2000« (7. Oktober 2006, 22:14)


Mittwoch, 11. Oktober 2006, 10:31

me again
this is finished fuel tank

i have also schratchbuild tool locker for left side

chassis with modifications, left side

and right side

air filter box and manifolds are also wrong, so i cut in pieces and i will try to represent the real shape


Mittwoch, 11. Oktober 2006, 12:46

very nice!!! It´s a very good idea to build the 2nd series Scania with the Heller parts. You do that very good. I think it´s the best possibility to get a real looking Scania. Espacially with the scratchcuilt parts. Hope to see more soon.


Weil: Elles onder 8 Zylinder isch assozial :P


Mittwoch, 11. Oktober 2006, 15:21

thanks for comments, i have this idea in my head for long time, i have already done something similar with mercedes benz, i combined front part from italeri with revell rear part for make 4x2 tractor on steel suspension. best thing is that you can use other two parts for build other truck, in this case i will do 141 6x2, sometime in future

ok, some progress with this scania
this is how looks modified air filter and pipe

here you can see how wrong is italeri air manifold to engine,(black one) i should build completly new one :roll:

engine is finished in original like colour

and this is bumper with supports for spoiler

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »sviz2000« (11. Oktober 2006, 15:23)


Mittwoch, 18. Oktober 2006, 15:45

hi, me again

this is how will looks new air intake manifold

and new exhaust pipe-on the left

schratchbuild fifth wheel plate with suports from iveco

original lights was too shalow, so i tried to do something focus like

i have add some plastic around window

front mudguards

dash with some schratchbuild switches

painted chasiss and engine

as i will put full closed rings, i have made schrachbuild rings, original will be used on some 6x2 modifications

inside look, there was space between roof and walls, so i made something like courtain support :idee:

painted cab

finished inside

cab is temporary mounted on chassis

this trailer is for test needs only

Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von »sviz2000« (20. Oktober 2006, 23:47)


Freitag, 3. November 2006, 15:09

test-fit for roof and side spoilers


Sonntag, 5. November 2006, 19:06

Classic paintjob, fantastic! :ok:

I like those simple old paintjobs on the early Scania very much!

Sachar :wink:
im Bau: ???


Dienstag, 21. November 2006, 08:07

Cab is finaly complete, after problems with fixing spoilers and very hard decals.

Upload Picture with PicTiger


Dienstag, 21. November 2006, 17:02

and finaly on the chassis.
there is still some small details missing, but more or less, this is it.

Do you like it?

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »sviz2000« (21. November 2006, 17:03)


Dienstag, 21. November 2006, 18:30

Yeahhhh, superb :ok: !!!!!!

The only thing I would have made different is the color of the spoilers, I think in blue it would have been better, but you made the choice... ;)

Sachar :wink:
im Bau: ???


Dienstag, 21. November 2006, 19:47

Super! :ok: :ok: :ok: :ok:
Cool!!!! :ok: :ok: :ok:

Gabi :wink:


Dienstag, 21. November 2006, 21:42

Hi there :wink:

I can just agree with the others. It´s a really nice job on an old but still good looking Scania. I´ll never get tired looking at this generation :ok:

I would also have painted the spoilers blue - but anyway - it was Your choice ;)

The greatest :respekt: from Denmark, for building a truck like this.



Dienstag, 21. November 2006, 21:48


Nice old Scania :ok: :ok: :ok:
But the colour of the Spoiler....... :cracy:Blue was much better.

Signatur folgt....


Donnerstag, 23. November 2006, 19:51

Great work, just loving it. Red is pefect for the spoilers. It gives the Scania 142 that typical 80's look.

Keep on ModelTrucking


Freitag, 24. November 2006, 08:17

Very very nice model of a very very nice Original!!

Nothing more to say i love it
Weil: Elles onder 8 Zylinder isch assozial :P