Sie sind nicht angemeldet.

Im Bau: Daf XF105 SSC POL-MAT

Pinball17

  • »Pinball17« ist der Autor dieses Themas

Beiträge: 59

Wohnort: England

  • Nachricht senden

1

Samstag, 19. Februar 2011, 21:09

Daf XF105 SSC POL-MAT

This is my new project,






first I needed to alter the roof if it was to go ahead,






sand of all detail and fill





after a couple of failed attempts and a natter with Howard at KFS I got to here





then after more attempts I got to here





this is now it, not quite accurate but it will do for me,





Next on the list to make is a long range fuel tank and a locker, adblue kit odered from Howard at KFS



Ron

Pinball17

  • »Pinball17« ist der Autor dieses Themas

Beiträge: 59

Wohnort: England

  • Nachricht senden

2

Dienstag, 22. Februar 2011, 20:35

Hello All,

I added a strip of 20 thou card down the inside of each chassis rail, before cutting the tank, battery box and spare wheel carrier,
from the rails, this is to stop the chassis from warping when filling the holes in afterwards, once everything was off, bits of scap strip
were put into the holes, these will be sanded flush later.








Thats all for now

Ron

chri

Beiträge: 2 186

Realname: Christopher

Wohnort: Kärnten/Nassfeld

  • Nachricht senden

3

Dienstag, 22. Februar 2011, 21:09

Hey :)

This looks like a very nice projekt :ok: The light on the roof look´s very good :) I´m curious about the next step :)

Sorry for my bad englisch ;( Kind regard and good luck to england :prost:

Mfg Chri
Modellbaumotto: "Egal wanns fertig wird, wichtig ist das es schön wird" ;)

Eine Übersicht meiner Baustellen gibts hier: Profil von »chri«

Pinball17

  • »Pinball17« ist der Autor dieses Themas

Beiträge: 59

Wohnort: England

  • Nachricht senden

4

Dienstag, 22. Februar 2011, 22:40

Hello Chri,

Next step is to make the new fuel tank, and a locker for the driver side, and await delivery from KFS of the adblue package that they do..

greetings from England

Ron

chri

Beiträge: 2 186

Realname: Christopher

Wohnort: Kärnten/Nassfeld

  • Nachricht senden

5

Dienstag, 22. Februar 2011, 22:47

So you have to do a lot of things :)

Mfg Chri
Modellbaumotto: "Egal wanns fertig wird, wichtig ist das es schön wird" ;)

Eine Übersicht meiner Baustellen gibts hier: Profil von »chri«

Pinball17

  • »Pinball17« ist der Autor dieses Themas

Beiträge: 59

Wohnort: England

  • Nachricht senden

6

Dienstag, 22. Februar 2011, 23:03

Hello Chri,

Yes I have!!, tonight I have made the cab without the air management kit (seitlichen Windleitblechen, Dachspoiler),
I will post fotos later

Ron

Svempa

unregistriert

7

Mittwoch, 23. Februar 2011, 11:21

Very nice projekt. Just keep it up!:ok: :ok:



Pinball17

  • »Pinball17« ist der Autor dieses Themas

Beiträge: 59

Wohnort: England

  • Nachricht senden

8

Donnerstag, 17. März 2011, 22:35

I have now made the fuel tank, first I made a box, and using a small electric sander made the shape I wanted, finishing off with a finer sandpaper,
it will be primed to see any imperfections and these will then be made good.





Then work was started on the adblue package from KFS, first needed to make a larger tank
as KFS one is only 50 litre and real truck has a 100 litre, a small part was made also for the frame
between frame and locker, finally a locker was made from scratch.





and now the real thing




Now to start work on the brackets that fix these to the chassis, as well as putting the
suspension and drivetrain together

Thats all for now

Ron

Pinball17

  • »Pinball17« ist der Autor dieses Themas

Beiträge: 59

Wohnort: England

  • Nachricht senden

9

Donnerstag, 8. September 2011, 20:51

Hello All,

Not done anything to this for a while, finished off my Betz Actros, now back to this,
have made the tank brackets and mounted to the chassis, also made the straps as well.

The fotos show the parts and temporarily assembled.








The tank was primed and a few defects have to be filled and sanded, then it will be ready
for spraying.
Have to finish the adblue package and locker box, sort out the exhaust, then the chassis will
be ready for painting.

More soon, hopefully

Ron

paddy83

Beiträge: 92

Wohnort: ziemlich weit oben im Osterzgebirge

  • Nachricht senden

10

Freitag, 9. September 2011, 05:29

Hi Ron,

great project, and i´m impressed by your details (brackets and stripes) on the tank. Looks right like original :)
Don´t forget to make rubbers under the stripes (i.e. from black isolation tape?)

Greetings
Gruß Paddy
Nicht weil es unerreichbar ist, wagen wir es nicht, sondern weil wir es nicht wagen ist es unerreichbar.

im Bau: Neoplan Cityliner N1218 HDL+ 1:24
Zur Zeit auf Eis gelegt: Peterbilt 378 Wrecker 1:25 von Revell (noch einer^^)
Weiter in Planung (momentan nur ein Produkt meiner Phantasie): "Ghost Rider" Peterbilt Custom Rig
sowie ein Luxus-Wohnmobil auf Basis Volvo VN "Powerhouse Coach"
Und irgendwann mal ein ganz besonderes Projekt mit einem Moebius International Lonester

Pinball17

  • »Pinball17« ist der Autor dieses Themas

Beiträge: 59

Wohnort: England

  • Nachricht senden

11

Freitag, 9. September 2011, 21:14

Zitat von »paddy83«

Hi Ron,

great project, and i´m impressed by your details (brackets and stripes) on the tank. Looks right like original :)
Don´t forget to make rubbers under the stripes (i.e. from black isolation tape?)

Greetings


Thanks,I have some thin vinyl that I use for the rubbers under the straps

Ron

tuci888

Beiträge: 329

Realname: Sebastian Neff

Wohnort: Biberach

  • Nachricht senden

12

Samstag, 10. September 2011, 09:09

hi,
thats a cool projekt, i saw this truck today night in france on a rasting place.

Pinball17

  • »Pinball17« ist der Autor dieses Themas

Beiträge: 59

Wohnort: England

  • Nachricht senden

13

Dienstag, 15. Mai 2012, 21:07

Evening All,

Been a while since I posted in this so here gooes,

I haven't done a lot recently for various reasons, but am now determined to finish for Gaydon.

The tank has now been finished and installed on the chassis





Also had to re route the exhaust, as on a left hooker the exhaust exits between the front wheelarch and derv tank.




now to get on with the interior painting

Ron

Pinball17

  • »Pinball17« ist der Autor dieses Themas

Beiträge: 59

Wohnort: England

  • Nachricht senden

14

Montag, 28. Mai 2012, 19:47

Hello All,

More now done to the otherside of the chassis, modified KFS ad -blue kit, and a scratchbuilt locker






More to follow as I hope to finish for the Truck Model Show at Gaydon, UK, in 2 weeks time

Ron

Tollocheck

Beiträge: 1 342

Realname: Torsten

Wohnort: 41334 Nettetal

  • Nachricht senden

15

Montag, 28. Mai 2012, 22:11

Hi Ron,

very nice project, your modifications are great. So go on. I'm looking forward to see further steps. :)

Greetings :wink:
Torsten
Der Weise verschweigt seine Meinung, also bin ich keiner...:ok:

Pinball17

  • »Pinball17« ist der Autor dieses Themas

Beiträge: 59

Wohnort: England

  • Nachricht senden

16

Freitag, 8. Juni 2012, 19:26

Evening All,

Now finished, a couple of final fotos, will make some more soon







Thats all, any comments welcome

Ron

Bernd Pfuscher

Beiträge: 5 515

Realname: Bernd

Wohnort:

  • Nachricht senden

17

Samstag, 9. Juni 2012, 07:08

Hello Ron

Great Job :respekt: . Looks like original.

Best regards - Bernd :wink:

Reserverad

Beiträge: 812

Realname: Hatti

Wohnort: Alpen-Republik

  • Nachricht senden

18

Samstag, 9. Juni 2012, 07:20

:wink: Hi Ron

PERFECT - JOB you've done :thumbsup: . I like it!!!!!!!!

:five: regards from Austria
da Hatti :ok:

ATKINSON, Feuerw VMR 100EP10, ALVIS STALWART, IVECO, ASTRAN Scania, BÜSSING Nahost, MAGIRUS, MB Kurzhauber, KRUPP V8, KRUPP 1060, Bulli T1, SCAMMELL Recovery, AUTOCAR Tanker, LAND ROVER 109, Schrott KRUPP V8, CITROËN Kebab,

Ähnliche Themen

Werbung