Im Bau: KENWORTH K-100 Aerodyne - Revell - 1/25 - Bauberichte

Tony70

Beiträge: 99

Realname: Antonín Velecký

Wohnort: Bohumín City - CZECH Republic

1

Mittwoch, 15. Dezember 2010, 17:50

KENWORTH K-100 Aerodyne - Revell - 1/25

Hello.

Here is my next model under construction. Trailer for this model is almost completed. It will Livestock Trailer from the AMT.

Of course, do not use decals and colors of tractors will be the same as the trailer.

Here are a few photographs of the building.

The first small changes.

Use the same rear fenders, but little change it.

Another change will be the new wheels. Use the wheels from AMT. Therefore I had to adjust the width of the axles.

Other modifications and alterations.

Adjusted propeller and the new position lights from LED. I think so it will be even better.

That's all for this moment ...

Tony

Zum Seitenanfang

Tony70

Beiträge: 99

Realname: Antonín Velecký

Wohnort: Bohumín City - CZECH Republic

2

Freitag, 17. Dezember 2010, 10:47

Hello.

A few more photos of the building.

The rear wheels of the AMT. Even without patina.

And my "favorite" activity. Cutting holes.

Starting with the interior. I made a sun visors and radio. Use the radio model of "Australian" Kenworth T900. The model will have the same right hand drive, so it's okay ...

Sun visors ...

Radio and holder ...

Here is a complete radio.

That's all for this moment ...

Tony

Zum Seitenanfang

bluestarmodells

Beiträge: 4 113

Realname: Ralph Amsler

Wohnort: Schweiz

3

Freitag, 17. Dezember 2010, 11:04

Hallo Tony

Schön zu sehen, was Du aus dem Bausatz machst :ok:

. Die kleinen Teile sind absolut spitze :ok:

.

Grüsse :wink:

Ralph

Hi Tony

Nice to see what you make of the kit :ok. The small parts are really great :ok:

.

Regards :wink:

Ralph

Ich traue Jedem. Nur nicht dem Teufel, der in Jedem steckt.

Zum Seitenanfang

Ted

Beiträge: 2 266

Realname: Gregor

Wohnort: Daheim

4

Freitag, 17. Dezember 2010, 11:25

Hey Tony.

It looks great. Nice work until now. Clean builtup and nice modifications.

:wink:

Ted

Nukular, das Wort heißt Nukular.

Zum Seitenanfang

Tony70

Beiträge: 99

Realname: Antonín Velecký

Wohnort: Bohumín City - CZECH Republic

5

Mittwoch, 29. Dezember 2010, 09:21

Hello.

Ralph, Ted :

Thanks for your comments ...

Here's a few more parts of the interior.

So here are a few small steps forward. I painted the bed, door panels, sun visors and I made a slight patina. Everything is composed of course without glue, just to test. The weather is bad, so I had to take pictures using a flash on the camera.

But there is perhaps something to see ...

That's all for this moment ...

Tony

Zum Seitenanfang

derDanny

Beiträge: 870

Realname: Danny

Wohnort: Neustadt/Orla Thüringen

6

Mittwoch, 29. Dezember 2010, 10:48

Great, realy great.

Grüße Danny

Zitat von »Yuriko«

Wie Mutti, stets sagte... Hätteste Tauben als Hobby... würdest du auch voller Freude im Dreck stehen!

3D-Druck - was ist möglich

Modellbauer in Ostthüringen

Zum Seitenanfang

Tony70

Beiträge: 99

Realname: Antonín Velecký

Wohnort: Bohumín City - CZECH Republic

7

Dienstag, 4. Januar 2011, 10:44

Hello.

Danny :

Thanks ...

Today only little progress.

That's all for this moment ...

Tony

Zum Seitenanfang

Pepe

Beiträge: 284

8

Freitag, 7. Januar 2011, 21:27

Nice stuff...

looking forward for more pictures of your Progress... I hope it will be a "used" rig...

Zum Seitenanfang

Tony70

Beiträge: 99

Realname: Antonín Velecký

Wohnort: Bohumín City - CZECH Republic

9

Donnerstag, 20. Januar 2011, 19:37

Hello.

Pepe :

Thank you.

Here is a few another photo's ...

Tony

Zum Seitenanfang

Big Al

Beiträge: 186

Wohnort: Würzburg

10

Freitag, 21. Januar 2011, 20:25

Hallo

klasse Start den du da vorlegst. Die Verkabelung sieht sehr realistisch. Weiter so!!!!!! Bin schon gespannt auf weitere Daten und Fackten.

gruß Arnd

Zum Seitenanfang

Tony70

Beiträge: 99

Realname: Antonín Velecký

Wohnort: Bohumín City - CZECH Republic

11

Samstag, 11. Februar 2012, 22:34

Hello all.

After a long time I'm back again.

Big Al : Belatedly, thank you for your comment. :ok:

I hope that in a few months to finish the model. Here are some photos of the building model ...

The new grille.

Modified brake cylinders.

Hose for air supply and socket for connection of electricity.

I decided to modify the original tank. I had to make a new mount tanks. I used brass and aluminum sheet and foil cap from the wine.

Modified tanks.

The tire on the right side with patina.

Tony

Zum Seitenanfang

GMotors

unregistriert

12

Sonntag, 12. Februar 2012, 00:18

Hello,

what i see in your building thread is unbeliveable.
I think you build a very nice truck whit details like an original.
I what for your finish like a little childe some days to christmas.
Stay on this thread up too the last comment

Kind regards Georg

Zum Seitenanfang

alex04

Beiträge: 4 287

Realname: Alexander

Wohnort: Hamburg

13

Sonntag, 12. Februar 2012, 10:34

hi tony, wow :sabber:

great job

alex

Zum Seitenanfang

Tony70

Beiträge: 99

Realname: Antonín Velecký

Wohnort: Bohumín City - CZECH Republic

14

Montag, 13. Februar 2012, 17:42

Hello.

Georg, Alex :

Thank you very much for your comments.

Today small steps forward.

Tony

Zum Seitenanfang

GMotors

unregistriert

15

Montag, 13. Februar 2012, 23:46

Hi Tony,

you made a very detailed Truck.
It´s nice to see the fine detailed parts in the cockpit and on the frame.
stay ahead,so it get´s to be like the big one

Kind regards Georg

Zum Seitenanfang

Tollocheck

Beiträge: 1 342

Realname: Torsten

Wohnort: 41334 Nettetal

16

Dienstag, 14. Februar 2012, 14:20

Hi Tony,

looks very good so far. :thumbsup:

Your modifications are great. Keep it up.

Kind regards :wink:

Torsten

Der Weise verschweigt seine Meinung, also bin ich keiner... :ok:

Zum Seitenanfang

Tony70

Beiträge: 99

Realname: Antonín Velecký

Wohnort: Bohumín City - CZECH Republic

17

Dienstag, 14. Februar 2012, 19:46

Hello.

Georg, Torsten :

Thank you for your comments and support. :ok:

Tanks will be reworked and will have a new grip ...

Hose with air valves and socket for electric ...

Simplified hose connection.

Tony

Zum Seitenanfang

barracuda

Beiträge: 408

Realname: Matthias

Wohnort: irgendwo zwischen Heidelberg und Karlsruhe

18

Mittwoch, 15. Februar 2012, 12:08

Hi Tony,

WOW, that´s awesome! The hoses, the dashboard, superb! :ok:

The photo-etched grille...is it made by ABER?

go ahead! I am already looking forward to see the finished truck!

greetings,
Matthias

neueste Galeriebeiträge:
Apollo astronaut on the moon
robot B9
Buick Wildcat

Zum Seitenanfang

bastelandre

Beiträge: 835

Wohnort: Zeven

19

Mittwoch, 15. Februar 2012, 12:44

Hi Tony,

Very nice construction project, but unfortunately I can not

englsich, really sad that I can not just have the same project at the kenny are here, so the interest is very great, have now written with google translator because I can no matter how some of :rolleyes:

abkucken! 'm really looking forward to the end result :ok:

! because everything is perfect since so Will you show what you are! just continue the way it looks now as one can only be envious! when he is ready to replace you, we'll get mine and I yours, ok? :smilie:

stay tuned!!

Greeting:
Andre

mack-dog.npage.de

Mein Highlight

Im Bau: Mad Max / Der Ford Falcon XA Red

Im Bau: zweimal P-47 Thunderbolt/1:32 in den versionen der Hun Hunter

Zum Seitenanfang

Tony70

Beiträge: 99

Realname: Antonín Velecký

Wohnort: Bohumín City - CZECH Republic

20

Mittwoch, 15. Februar 2012, 16:15

Hello.

Thank you very much for your comments.

Matthias :

All photo - etched parts are of Czech origin CTM.
They are designed for Kenworth W900, but can also be used for model K100 ...

Andre :

My English is not too good. I think our hobby is more important than language.

Improved exhaust with using photo-etchings from the CTM.

Tony

Zum Seitenanfang

Tollocheck

Beiträge: 1 342

Realname: Torsten

Wohnort: 41334 Nettetal

21

Donnerstag, 16. Februar 2012, 13:04

Hi Tony,

nice work, the air hoses are stunning. :ok:

Kind regards :wink:

Torsten

Der Weise verschweigt seine Meinung, also bin ich keiner... :ok:

Zum Seitenanfang

bastelandre

Beiträge: 835

Wohnort: Zeven

22

Donnerstag, 16. Februar 2012, 17:05

Hello Tony,
that's true, because I agree with you, the etched parts would you use, I get too happy just here are quite so Expensive! here I can barely afford to! If then there are my only on special kits which, for example for my Rubber Duck has gotten a few! Since then looked at the other models, just how I can improve my models and I can take it as my highlight of my time clicking highlight the grille I have the lattice of Brat phannenspritz taken for meshing for grille's used! Do you know where I could get the etched parts cheap from? :nixweis:

Greeting:
Andre

mack-dog.npage.de

Mein Highlight

Im Bau: Mad Max / Der Ford Falcon XA Red

Im Bau: zweimal P-47 Thunderbolt/1:32 in den versionen der Hun Hunter

Zum Seitenanfang

Tony70

Beiträge: 99

Realname: Antonín Velecký

Wohnort: Bohumín City - CZECH Republic

23

Sonntag, 19. Februar 2012, 15:46

Hello.

Andre :

Sorry, I do not understand everything you wrote.
Yes, models can improve the photo-etched parts, but you can also change many other details.
Unfortunately, in the Czech Republic are photo-etched parts is very expensive. But of course the model using these parts look much better and so is buying.

I decided to add a few details on the engine. Here are the first photos ...

Tony

Zum Seitenanfang

bastelandre

Beiträge: 835

Wohnort: Zeven

24

Montag, 20. Februar 2012, 09:19

Hi Tony,
I thought since you are so many photo etched parts CUSTOM which are cheaper there than here, apparently I thought wrong! Because when I get only Customised models Photo etched parts! Otherwise, the taking what is there and what can be improved.

Greeting:
Andre

mack-dog.npage.de

Mein Highlight

Im Bau: Mad Max / Der Ford Falcon XA Red

Im Bau: zweimal P-47 Thunderbolt/1:32 in den versionen der Hun Hunter

Zum Seitenanfang

Dermax

Beiträge: 413

Realname: Maximilian

Wohnort: Osthofen

25

Montag, 20. Februar 2012, 09:41

WOW, thats really good working! :ok:

Looks reall nice. And the details... :love:

Gruß Max

Meine Homepage

Zum Seitenanfang

GMotors

unregistriert

26

Freitag, 16. März 2012, 15:47

oO wenn ich das english von so manchen hier lese dann kann einem schlecht werden.
Bitte nicht vom Google Translator einfach rüber kopieren,denn der übersetzt Wort für Wort
und euere Texte sind dann nahezu absolut Sinnfrei und unverständlich.

Gruß Georg