Sie sind nicht angemeldet.

Im Bau: Kenworth heavy + tank trailer

Lieber Besucher, herzlich willkommen bei: Das Wettringer Modellbauforum. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.

  • 1
  • 2

VW freak

  • »VW freak« ist der Autor dieses Themas

Beiträge: 110

Wohnort: Žalec-Slowenien

  • Nachricht senden

1

Montag, 6. August 2007, 12:10

Kenworth heavy + tank trailer

And it's time for a next model.

Tihs time it is a Kenworth from Revell, heavy hauler. Pretty rare and expensive model, old at least ten years.

The truck will cut and extended, one more steer axle will be added, a crane kit from KFS will be added, with a seat and everything. An extra axle came from Zipi ( :prost: ), and front wheels will be reaplaced with KFS TQ20B wheels.







Next thing is a 3axle dolly, which is going to be made from a 6-axle heavy tank trailer from Revell.








And then comes a trailer. 6-axle flat bed trailer from Revell. It will be cut, turned to extendable, and expected to be 82 cm long when extended.





And on the trailer comes a load. It will be a train car.





The all together length will be huge, also a lot of work will be involved, and a lot of money has allready been spent on this porject. :bang:

:wink:
Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24

Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von »VW freak« (13. August 2007, 19:07)

Modellfreak

Beiträge: 1 929

Wohnort: Bünde

  • Nachricht senden

2

Montag, 6. August 2007, 16:39

Hello Matjaz,

I think you want to build a beutiful truck, Revells Kenwoth heavy is ja nice Truck with Bullbar, a lot of weels and so on. This Trailer ist perfekt for the Truck, you can't find anythink thats better for a Heavy Truck.

:wink: Marco

Truckin´Tom

Beiträge: 160

Wohnort: Nöstlbach-St.Marien/ Austria

  • Nachricht senden

3

Montag, 6. August 2007, 18:47

Hi Matjaz!

thats a really great project :ok: - i can´t wait to see the finished Modell!
The Kenworth is a very interesting Truck- i sterted to built it too- but mine is the newest generation by revell.

Where did you get the truck and the trailer- ebay? :nixweis:

Greets, Thomas :wink:
Grüße, Thomas :wink:
Und nicht vergessen: :schrei:US-Trucks forever!

VW freak

  • »VW freak« ist der Autor dieses Themas

Beiträge: 110

Wohnort: Žalec-Slowenien

  • Nachricht senden

4

Montag, 6. August 2007, 20:15

Thank you for your wishes.

Yes, all modells used in this composition ( Keny, both trailers and a railroad car ) were bought on e-bay.de.

:wink:
Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24

Truckin´Tom

Beiträge: 160

Wohnort: Nöstlbach-St.Marien/ Austria

  • Nachricht senden

5

Dienstag, 7. August 2007, 19:02

@ Matjaz:

:hand: Thanks for the answer!!!

Greets, Thomas :wink:
Grüße, Thomas :wink:
Und nicht vergessen: :schrei:US-Trucks forever!

Der Käsekopf

Beiträge: 415

Wohnort: Niederlande

  • Nachricht senden

6

Dienstag, 7. August 2007, 19:45

Hello Matjaz,

Good luck whit this big project. I will follow your buildingproces. When do you think it will be finished?

Greatz,

Egbert

VW freak

  • »VW freak« ist der Autor dieses Themas

Beiträge: 110

Wohnort: Žalec-Slowenien

  • Nachricht senden

7

Dienstag, 7. August 2007, 21:50

If all goes well, in about 1,5 or 2 years :rot:.
I'll take the time and work slowly, because I want to make as good as I can.

:wink:
Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24

RODMAN

Beiträge: 2 148

Realname: Andreas

Wohnort: Am Fuß der Eifel

  • Nachricht senden

8

Mittwoch, 8. August 2007, 17:19

Hy Matjaz,

looks to become a very interesting and really HUGE projekt. :) :ok:

So, what can I say except:

"Have a nice trip, boy!!" :)

I will take a look at your posting every time I`ll come to this site.

Wish you lot`s (and ton`s ;) ) of fun and naturally good luck!

Greetz, A.
Immer mit der Ruhe. Das Gras wächst nicht schneller wenn man dran zieht!


In der Mache: MAN F 2000 V10 (Langzeit- :roll: )Projekt und meine, ;) , "Affäre"

Manches noch auf Eis .... :rrr: ....aber langsam wird´s wärmer 8)

VW freak

  • »VW freak« ist der Autor dieses Themas

Beiträge: 110

Wohnort: Žalec-Slowenien

  • Nachricht senden

9

Freitag, 10. August 2007, 19:59

Thank you.

And on we go. The undercareage is finally put together. At least the length. :cracy: It's made from 5 pieces. Blue part, two times black part, another and white part. The legth is allready 42 cm.





:wink:
Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24

VW freak

  • »VW freak« ist der Autor dieses Themas

Beiträge: 110

Wohnort: Žalec-Slowenien

  • Nachricht senden

10

Sonntag, 12. August 2007, 10:04

And again some progress. The undercareage is finished. It is now straight, in line and glued together.


:wink:
Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24

VW freak

  • »VW freak« ist der Autor dieses Themas

Beiträge: 110

Wohnort: Žalec-Slowenien

  • Nachricht senden

11

Montag, 13. August 2007, 19:12

And I have to notice you, that there has been some changes. :rot:

I found some really good pictures, and then also Zipi hepled me to decide to make a different model.
And, there will be no flat bed trailer and no dolly :will: :will:
And also no train car :idee: :idee:

There will be just a 6 axle heavy tank trailer from Revell.
The only thing that stays the same, is the truck, and it will be much more modified than originally thought. :verrückt: :verrückt:

And some pictures of the truck that inspired me for this idea.







:ok: :ok:

:wink:
Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24

raceroland

unregistriert

12

Samstag, 18. August 2007, 23:42

Hello Matjaz

What in heavens name is this??????????? it´s a real bombastic roadtrain,also the choice of color is beautyfull not the white / black or red ones we see all the time. :ok:

PERFECT RESULT :hand:

Roland

VW freak

  • »VW freak« ist der Autor dieses Themas

Beiträge: 110

Wohnort: Žalec-Slowenien

  • Nachricht senden

13

Sonntag, 19. August 2007, 08:16

Thank you.

But I have to admit, that this truck isn't my work. :rot: :rot: I found those pictures on the internet. There are also some others very beutifull and amazing ideas about trucks. :cracy: :cracy:
3D art pool

And finally the undercareage is ready for painting. Pictures will be followed soon.

And now I'll start working on the trailer.

:wink: :wink:
Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24

VW freak

  • »VW freak« ist der Autor dieses Themas

Beiträge: 110

Wohnort: Žalec-Slowenien

  • Nachricht senden

14

Samstag, 1. September 2007, 20:58

Hi.
I'm asking you all to help me, please.
Could you please give me some ideas about the colour of the main frame ( undercareage ) and for the motor. The truck will be painted like on pictures above in purple with chrome.

Thank you for your ideas.

:wink:
Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24

Silencer

Beiträge: 995

Realname: Pascal

Wohnort: Assen Niederlände

  • Nachricht senden

15

Montag, 3. September 2007, 05:35

Hallo Matjaz,

Could you send me a detailed picture of the manual where the bullbar is mounted on the truck??

I saw a picture on the box but that picture isn't quite detailed.

With kind regards,

Pascal

Silencer

Beiträge: 995

Realname: Pascal

Wohnort: Assen Niederlände

  • Nachricht senden

16

Montag, 3. September 2007, 05:43

Hallo Matjaz,

Perhaps you should paint the undercareage in silver or so.
I think its a good combination with the purple paint.

And:

if you don't use the flatbet trailer, is it for sale?? if not, can the load(big engine) be bought??

MFg Pascal

VW freak

  • »VW freak« ist der Autor dieses Themas

Beiträge: 110

Wohnort: Žalec-Slowenien

  • Nachricht senden

17

Donnerstag, 6. September 2007, 14:47

@ Silencer: The picture is coming. Sorry, but neither flat bed or the cargo are not for sale. They will be used in nekt project. :rot:

Thank you for your advices. The finall color of the frame will be decided today. It will be green, I just don't know yet how light and how intense green.

The main frame is mostly done and customized ( main frame, axles, universal joints,... )


Then I had to do a new cabin holder on the back side.


PE meshes for exhaust pipes are ready.


And first tests of rolling them have began. But I came to an obsticle. I don't know how to roll them without snaping them along the holes. If I do it by the instructions that the PE parts came with, I can roll them, but I don't know how to make them stay rolled. Finall diameter should have been around 12mm, but when I let them go, They unroll back to about 20mm of diamater :motz: :motz:


Now I rolled them on a 11,5mm tube, and permanently fixed in that position, so they cannot unroll. I'll let in this way for about 2-3 weeks and hope, that they wiil stay rolled, when I peel off the tape.

If someone has done this before, PLEASE HELP!!! :nixweis: :nixweis:

Silencer:
Sorry, but in instructions it also doesn't say where excatly is the mesh :motz: :motz:
Picture of the manual

:wink:
Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »VW freak« (6. September 2007, 14:50)

Silencer

Beiträge: 995

Realname: Pascal

Wohnort: Assen Niederlände

  • Nachricht senden

18

Donnerstag, 6. September 2007, 15:33

Hi Matjaz,
Thanx for the picture. It is in fact quite helpful.

With the exhaust pipes i can't help you, I have no experience in that.

Good luck with the project,
Pascal

alfisti

Beiträge: 4 064

Realname: Daniel

Wohnort: Traun, Österreich

  • Nachricht senden

19

Freitag, 7. September 2007, 08:07

Hi Matjaz.

You are building a very nice truck:ok: , I can`t wait to see it ready!

I don`t think that the exhaust meshes will stay at 12mm after 3 weeks, becaus it is metal and they will always turn back a little.
Maybe you should roll the meshes on a diameter smaller than 12mm, so if they unroll their diameter will be approximately 12, then you can fix it with the pe rings.

I hope it works.

Greetings from Austria:wink:
ALFA ROMEO - Geschmack macht einsam!

VW freak

  • »VW freak« ist der Autor dieses Themas

Beiträge: 110

Wohnort: Žalec-Slowenien

  • Nachricht senden

20

Freitag, 7. September 2007, 09:57

Thank you, but the problem is, that I've allready tryed to roll them to a 10 mm, but one mesh started cracking between the holes :motz: :motz:.
:(

So now I'v decieded to let them rolled as they are, on a 11,5mm, then I'm gonna super glue them together.

Hope it works. I can't bend no more. If I bend them some more, I'm affraid I'll have to buy a new set.

:wink:
Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24

VW freak

  • »VW freak« ist der Autor dieses Themas

Beiträge: 110

Wohnort: Žalec-Slowenien

  • Nachricht senden

21

Freitag, 7. September 2007, 21:54

:tanz: :tanz: :party: :party: Yesterday I got another ( this one has allready been built, but when comparing the prize I payed against a 120€ for a new one, so I'll just make 1 out of 2 allready built ) Heavy tank trailer.Thank you Skandinavc FH :ok: :ok:.

And now let the games begin :lol:. The truck is on a pauze ( I still managed to make a new cab holder, new exhaust pipe holders, built the engine to the point, when it is ready for the painting... ) because of lack of will :rot: :rot:. But another trailer returned the will so tomorrow I'll "unpaint" them and make them ready for a new paint, and with a bit of luck, perhaps also cut them both if enough time remains.

Pictures will follow.

:wink: :wink:
Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24

VW freak

  • »VW freak« ist der Autor dieses Themas

Beiträge: 110

Wohnort: Žalec-Slowenien

  • Nachricht senden

22

Samstag, 22. September 2007, 12:38

And again some more progress.

Both trailers that are going to be used in this project.




First I cut out the holders on both sides.


And after a lot of messaureing, thinking, drawing,.... sawing of the undercareafe and of the tubes began.


Some testing pictures of the truck and trailer.






But, the length wasn't good ( the trailer was simply unreal long ), so I started cutting again and last night me and ZiPi came to a super idea. And on with the cutting we go :lol:. Here is now the body of the truck. It has to be shortened one more time, because it is still too long.


And the body for the trailer.


And a new placement for the trailer. It will now have only 6 axles, bu it will be lengthened.


That's all for now. Oh. The truck will have 2 axles with super single wheels that will be followed by 3+2+6 axles with 4 wheels/axle. :verrückt: :verrückt: :verrückt:

:wink:
Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24

VW freak

  • »VW freak« ist der Autor dieses Themas

Beiträge: 110

Wohnort: Žalec-Slowenien

  • Nachricht senden

23

Dienstag, 25. September 2007, 18:21

The body for the truck is glued, edges have been paper-sanded off.


And today I had to cut off from 0 to 1,5mm of the underbody, to level it to total flat, because originaly it was made for a seadle and some other stuff.


And first tests with new profiles for the body, and the underbody is now ready for painting.




:wink:
Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24

VW freak

  • »VW freak« ist der Autor dieses Themas

Beiträge: 110

Wohnort: Žalec-Slowenien

  • Nachricht senden

24

Donnerstag, 22. November 2007, 16:21

Uf....
It's been some time, since any progress :( .
Well, now I began making some progress on this truck, because it has to be finished before the birth of my son.

I first tryed to coat them in polystyrol plates, the I've put too much glue, and the result was all sprincled :pfeif:. You can see it on next piscture, so I had to throw them away.


Than I bought a drainage pipe, cut it in 2 pieces.


Then I andpapered it with 400, then 800, and with 1200, and the result is allready something I like. Why sanding if it will be sprayed? For more shiny colors.


Any comments?
:wink:
Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24

Butterfly

Beiträge: 192

Wohnort: Reichenbach O.L/Dresden

  • Nachricht senden

25

Donnerstag, 22. November 2007, 19:57

wow, what a great project .... i´m very impressed, i cant believe it :respekt:
MfG

Kersten

Im Bau: Jeep Golden Eagle 1:16

Silencer

Beiträge: 995

Realname: Pascal

Wohnort: Assen Niederlände

  • Nachricht senden

26

Donnerstag, 29. November 2007, 03:38

Hello Matjaz,

Your truck looks very great, keep up the good work.

Ist there any progress??

MFG Pascal

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »Silencer« (29. November 2007, 03:38)

VW freak

  • »VW freak« ist der Autor dieses Themas

Beiträge: 110

Wohnort: Žalec-Slowenien

  • Nachricht senden

27

Donnerstag, 29. November 2007, 10:10

I hope I will be able to continue soon, because a week ago, I was makeing some progress, but then, when I was cutting off some plastic, one piece of it flew into my eye and got stuck there, so I had to ask my wife in the middle of the night, to take me to the hospital. I'm still recovering, but soon, I hope it will go on.

:wink:
Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24

Silencer

Beiträge: 995

Realname: Pascal

Wohnort: Assen Niederlände

  • Nachricht senden

28

Donnerstag, 29. November 2007, 12:24

Hello Matjaz,

That's not verry good, who says modell building is a safe hobby...

But i wish you a fast and good recovery from your injuries :trost: :trost:.

With kind regards,

Pascal

VW freak

  • »VW freak« ist der Autor dieses Themas

Beiträge: 110

Wohnort: Žalec-Slowenien

  • Nachricht senden

29

Donnerstag, 29. November 2007, 20:23

And on we go. My eye is now OK, so I returned to work.

I inserted plastic caps from heavy tank trailers ( the only think that could have been saved ). Then I added some car cit, and left to dry.The car kit "grabbed" both sides, plastic and metal, amazingly strong..





And today I've used some sand paper ( 40, 80, 180, 800 and 1000 ) and the result was super. I also find out, that maybe I won't have to color the pipes, if I sand them very well :idee:.



Any comments?

:wink:
Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24

VW freak

  • »VW freak« ist der Autor dieses Themas

Beiträge: 110

Wohnort: Žalec-Slowenien

  • Nachricht senden

30

Dienstag, 22. Januar 2008, 21:20

After a long time, some more progress can be seen, now that the exams are over, and a new desire for model building is here :lol:.
The trailer undercareage has been put together in one piece. All axles were broken off, so I had to bore holes and make the trailer ready for instalation of metal axels.
And some wireing has been done.







:wink:
Bauberichte=>Kenworth heavy + tank trailer
Bildergalerie=>Revell Peterbilt Alaskan Hauler + Heavy Gravel Trailer
Bildergalerie=>Revell Bussing + Hanomag trailer
Dioramenbau=>Display case for trucks in 1/24
  • 1
  • 2
Werbung